---
layout: post
title: Bird CPU usage
date: 2025-01-07 19:06 +0100
categories: tech
lang: en
---

Several times already, I noticed this in my Munin monitoring:

{% image
img="https://pics.uvokchee.de/upload/2025/01/07/20250107180512-c1453895.png"
alt="RRD tool graphic showing a high CPU usage" %}

I found it strange, but had no time to inspect further.

Recently, I tried to investigate what happens on the server there.
htop showed high CPU usage for both bird and dnsmasq (always
together) in these times.

Fuming a bit, I went with a brute-force approach:

```
#!/bin/bash

# Configuration
THRESHOLD=1.0
# 3 hours
DURATION=$((3*80*80))
MAIL_TO="lolnope"
SUBJECT="High Load Average Alert"
BODY="The load average has been above ${THRESHOLD} for more than 3 hours."
REBOOT_CMD="/sbin/reboot"

# Function to check the load average
check_load() {
    # 15 min loadavg
    loadavg=$(awk '{print $3}' /proc/loadavg)
    echo "$(date): Current Load Average: $loadavg"

    if (( $(echo "$loadavg > $THRESHOLD" | bc -l) )); then
        echo "$(date): Load average is above threshold."
        return 0
    else
        echo "$(date): Load average is below threshold."
        return 1
    fi
}

# Monitor the load average
start_time=$(date +%s)
while true; do
    if check_load; then
        current_time=$(date +%s)
        elapsed_time=$((current_time - start_time))

        if [ "$elapsed_time" -gt "$DURATION" ]; then
            echo "$(date): Load average has been above threshold for more than 3 hours."

            # Send alert email
            (echo "$BODY"; ps -e -o %cpu,%mem,cmd --sort pcpu | tail) | mail -s "$SUBJECT" "$MAIL_TO"

            # Reboot the server
#            systemctl stop bird
#            systemctl start bird
            $REBOOT_CMD
            break
        fi
    else
        start_time=$(date +%s)
    fi
    sleep 300 # Check every 5 minutes
done

```

Specifically, the output of ps

```
22.7  2.7 /usr/sbin/bird -f -u bird -g bird
33.3  0.1 ps -e -o %cpu,%mem,cmd --sort pcpu
37.4  0.0 /usr/sbin/dnsmasq -x /run/dnsmasq/dnsmasq.pid -u dnsmasq -7 /etc/dnsmasq.d,.dpkg-dist,.dpkg-old,.dpkg-new,.bak --local-service --trust-anchor=.,20326,8,2,e06d44b80b8f1d39a95c0b0d7c65d08458e880409bbc683457104237c7f8ec8d
```

confirmed the suspicion - although the "percentage" is a bit weird. From the
manpage:

> Currently, it is the CPU time used divided by the time the process has been
> running (cputime/realtime ratio), expressed as a percentage.

(So if the process runs "long enough" and only starts misbehaving after a year,
it won't show up?).

I asked an LLM what to do, in addition to strace, and it suggested perf.
Unfortunately, this requires debug symbols [1]. [And while Debian does provide
debug symbols](https://wiki.debian.org/HowToGetABacktrace) - it doesn't for
dnsmasq (yet) in bookworm.  Luckily, the nice people at labs.nic.cz provide a
dbgsym package in their Bird(2) Debian repository.

Now, stracing dnsmasq (when "idle") reveals some recvmsg of type `RTM_NEWROUTE`.
I have *no idea* why dnsmasq would need that. But I already *assume* the high
CPU usage occurs when Bird exports lots of routes to the kernel.

Also, in journalctl, I see lots of the infamous `Kernel dropped some netlink
messages, will resync on next scan.` messages at times - the message apparently
nobody has a solution to, and even though there are mailing list posts telling
to sysctl `net.core.rmem_default`, I doesn't seem to yield a solution.

[1] At least when I want to see the binaries function names.
  Kernel symbols seem to show up fine.