2 files changed, 18 insertions, 14 deletions
diff --git a/par_to_ser.tb.v b/par_to_ser.tb.v
index bc87f6f..2d1fc6d 100644
--- a/par_to_ser.tb.v
+++ b/par_to_ser.tb.v
@@ -5,14 +5,14 @@ module par_to_ser_tb (
 
 reg clk_i;
 reg rst_i;
-reg do_send_i;
+reg data_valid_i;
 reg [7:0] dat_i;
 wire dat_o;
 
 par_to_ser uut(
   .clk_i(clk_i),
   .rst_i(rst_i),
-  .do_send_i(do_send_i),
+  .data_valid_i(data_valid_i),
   .dat_i(dat_i),
   .dat_o(dat_o)
 );
@@ -21,7 +21,7 @@ initial begin
   $dumpfile("par_to_ser.lxt2"); $dumpvars();
   clk_i <= 0;
   rst_i <= 1'b1;
-  do_send_i <= 1'b0;
+  data_valid_i <= 1'b0;
 
   #1
   rst_i <= 1'b0;
@@ -33,13 +33,17 @@ always #10 clk_i = ~clk_i;
 
 initial begin
   #37
-  dat_i <= 8'haa;
+  dat_i <= 8'b00110011;
   #13
-  do_send_i <= 1'b1;
+  data_valid_i <= 1'b1;
+
+  // clock data in
+  #20
+
   // wait 8 clock cycles?
-  #80
+  #160
 
-  do_send_i <= 1'b0;
+  data_valid_i <= 1'b0;
 
   #400
   $finish();
diff --git a/par_to_ser.v b/par_to_ser.v
index b3a8eb0..87f9a0e 100644
--- a/par_to_ser.v
+++ b/par_to_ser.v
@@ -1,13 +1,9 @@
 // parallel to serial converter
-// Learning:
-// I think I need a "start" signal (do_send_i),
-// otherwise I'll never know when to copy the input data
-// to out internal register
 
 module par_to_ser (
   input rst_i,
   input clk_i,
-  input do_send_i,
+  input data_valid_i,
   input [7:0] dat_i,
   output reg dat_o
 );
@@ -25,9 +21,13 @@ reg [7:0] send_data = 8'hff;
 always @(posedge clk_i or negedge rst_i) begin
   if (!rst_i) begin
     dat_o <= 1'b1;
-  end else if (do_send_i && !sending) begin
+  end else if (data_valid_i && !sending) begin
     sending <= 1;
-    send_data <= dat_i;
+    dat_o = dat_i[0];
+    send_data[6:0] <= dat_i[7:1];
+  end else if (!data_valid_i) begin
+    sending <= 1'b0;
+    dat_o = 1'b1;
   end else if (sending) begin
     dat_o = send_data[0];
     send_data[6:0] <= send_data[7:1];